星空无限传媒

星空无限传媒 Wi-Fi Networks   |  

AU-Secure

The au-secure wireless network is available to all 星空无限传媒 students, faculty, staff, and alumni who have a valid, active 星空无限传媒 username and password.

Choose your operating system. (For personal devices only — not University-issued.)

  1. From the notification tray (bottom-right corner), select the wireless network icon.
  2. Choose the Wi-Fi symbol from the menu.
  3. Select au-secure.
  4. When prompted, enter your 星空无限传媒 username (lowercase, without "@andrews.edu") and password, then select OK.
  5. If a message appears that the server's identity can't be verified, select Connect.
  6. The system will connect to au-secure and show "Connected."
  1. If you're connected to au-guest, remove it from your list of wireless networks:
    • On the Finder bar, select the Wi-Fi (Airport) icon > Open Network Preferences…
    • If necessary, select the Lock to authenticate and make changes.
    • Select Advanced…
    • Select au-guest.
    • Select –.
    • Select OK.
  2. In the Network Name drop-down, select au-secure.
  3. When prompted, enter your 星空无限传媒 username (lowercase, without "@andrews.edu") and password.
  4. If a security prompt appears, select Always Allow.
  5. If a certificate page appears, select Accept.
  6. The device will connect to the au-secure wireless network.

Troubleshooting tips

If you're still unable to connect to au-secure, try the following:

  • "Forget" au-secure, then re-authenticate to it.
  • Restart your Apple computer.

Note: due to variations in Android devices, not every device works the same way, and this guide may not match yours exactly.

  1. Go to Settings > Wi-Fi.
  2. Make sure Wi-Fi is checked or On.
  3. Under Wi-Fi networks, select au-secure.
  4. Configure the following options:
    • EAP Method: PEAP
    • Phase 2 authentication: MSCHAPV2
    • CA Certificate: Unspecified or Do Not Validate
    • Identity: your 星空无限传媒 username (lowercase, without "@andrews.edu")
    • Password: your 星空无限传媒 password
  5. Select Connect.
  1. Go to Settings > Wi-Fi.
  2. If you're connected to au-guest, select it, then select Forget This Network (select Forget again to confirm).
  3. Select au-secure.
  4. When prompted, enter your 星空无限传媒 username (lowercase, without "@andrews.edu") and password.
  5. If you receive "Unable to join the network 'au-secure'," select Dismiss, then select Join again.
  6. On the certificate page, select Accept.
  7. The device will connect to the au-secure wireless network.
  1. Select the wireless icon on the taskbar (lower-right corner).
  2. Select No Network. (If not connected, it shows a wireless symbol with an "x" and displays "No network.")
  3. Select au-secure from the list of available networks. A configuration window will appear.
  4. Enter the following information:
    • Encryption Settings: LEAP
    • Username: your 星空无限传媒 username (lowercase, without "@andrews.edu")
    • Password: your 星空无限传媒 password

AU-Guest

AU-Guest is an open network intended for 星空无限传媒 guests and visitors who do not have University usernames. Once connected, Wi-Fi will work across campus throughout your visit. For assistance or questions, contact the ITS Help Desk at helpdesk@andrews.edu or 269-471-6016.

Students, employees, and alumni with an active, valid 星空无限传媒 username should use the AU-Secure wireless network.

← ITS Help Desk Home