User Guide
Table of Contents
Getting Started
Downloading the Inventory Management Application is easy! Just visit this website to get started. Once the file is downloaded, double-click on the file to run the application.
Using the Application
Double-click on the downloaded file to launch the application. You should be presented with a login screen that looks like the following:
Logging In
In order to use the application, you must successfully log in. Only users who have been granted permission to use this application may log in. Unless otherwise communicated to you, your login credentials will be the same credentials you use on campus to log into 星空无限传媒 services (the same credentials used for Vault, LearningHub, 星空无限传媒 WiFi, etc.).
If you are having issues logging in, use the following checklist to troubleshoot the problem:
-
Are you running the latest version of the application?
Make sure that you update the application whenever you are prompted to. -
Do you have a valid internet connection?
This application requires an active internet connection in order to work. Please ensure your internet connection is operating properly. -
Are you on the 星空无限传媒 network?
Since this application is for internal use only, access is restricted to individuals on the 星空无限传媒 network. Ensure you are connected to the "au-secure" or "au-guest" WiFi network, or that your computer is plugged into an ethernet port on campus. You may also access the application through an authorized VPN connection.
If you require access from off-campus without VPN access, please contact the Department of Physics to arrange access. -
Are you authorized to use the application?
Users must be manually authorized by the Department of Physics. If you are not currently authorized and need access, please contact the Department of Physics. -
Have you changed your AU password?
If so, you must be reauthorized to use the application.
If issues persist, please contact the Department of Physics.
Searching for Assets
Once you have logged in, the search window shown above will open. You can search for assets by name, location, serial number, or 星空无限传媒 Inventory number. Combining these fields is also supported.
Currently, all fields perform an exact search on the database. Searching by asset name supports the asterisk (*) as a wildcard character. Searches are not case-sensitive.
- To search for all assets whose name begins with "table", enter
table *. - To search strictly for the exact term "table", enter
table. - To search for an asset whose name ends with "table" located in Haughey Hall, Room 222, enter
* tablein the Name field andHYH-222in the Location field.
Asset locations follow this format: Building Code – Room Number – Shelf/Row (for example, an asset in Haughey Hall, Room 222, Shelf A, Row 5 is labeled HYH-222-A5).
The location search supports partial queries by Building Code only or by Building Code and Room Number. For example, HYH displays all assets in Haughey Hall, while HYH-222 displays all assets in Room 222.
For a complete list of building abbreviations, please refer to the 星空无限传媒 Campus Map (note that Griggs Hall-A and Griggs Hall-B use codes GHA and GHB).
Adding New Assets
To add an asset, select File > Add new asset from the top menu bar. All fields are optional except Name, Location, and Quantity.
If a record number is left blank, a new number will be automatically generated. If you specify an existing record number, selecting a manual for the new asset will overwrite the manual for all assets sharing that record number.
- Image: Click "Choose image" to upload a photo. You can change the selection with "Reselect" or remove it using the link beneath the preview.
- Digital Manual: Check "Softcopy Manual Available" to attach a PDF up to 30MB. Uncheck the box to remove it.
- Physical Manual: Check "Hardcopy Manual Available" if a printed manual is kept on file.
- Receipt: Check "Receipt Available" to attach an invoice/receipt PDF up to 30MB. Uncheck the box to remove it.
Editing Existing Assets
Select an asset from the search results, then navigate to Asset > Edit (or press F12). When in edit mode, the top window bar turns purple and editable fields unlock.
When finished, press F12 or select Asset > Save to save your changes and confirm the prompt dialog.
Note: Edits cannot currently be reverted once saved.
Removing Existing Assets
Only users with extended privileges can remove assets from the database. To request these permissions, contact the Department of Physics.
If authorized, select an item and press the Delete key or go to Asset > Remove. You will be prompted to confirm the deletion and re-enter your password.
Warning: Removing an asset is permanent and cannot be undone.
Search Modes
Note: This section is currently under development.
Full-Text Mode
Full-text mode evaluates search queries as natural language phrases without special operators, ranking results by relevance.
Phrases enclosed in double quotation marks (") match rows that contain the exact phrase as typed. Non-word characters do not need to match exactly, but words must appear in the same sequence.
Words ignored during full-text searches include:
- Words shorter than three characters (default minimum word length).
- Words found in the stopword list (common terms such as "the" or "some").
For additional technical details, see the .
Query Expansion
Query expansion is designed for short search phrases where additional context helps return relevant records. The search runs twice: first with the original query, and a second time combining the original query with the most relevant results from the initial query.
Note: Query expansion can return irrelevant results if used on broader search terms; reserve its use for short queries.
For additional information, visit the .
Boolean Mode
Boolean search interprets operators in the search query to require, exclude, or adjust weights for specific keywords:
+– Required: The word must be present in each returned row.-– Excluded: The word must not appear in any returned row.- (no operator) – Optional: The word is optional, but rows containing it are ranked higher.
@distance– Proximity: Checks if two or more words appear within a specified token distance (e.g.,"word1 word2" @8).>and<– Relevance Weight: Increases (>) or decreases (<) the word's contribution to the row's score.( )– Grouping: Groups terms into sub-expressions.~– Negation: Decreases the relevance score of a row without excluding it entirely.*– Truncation/Wildcard: Appended to a word root to match prefix variations (e.g.,apple*matches "apples" and "applesauce")." "– Exact Phrase: Matches the exact sequence of enclosed terms.
For full documentation, refer to the or review Appendix A.
Contact Us / Support
Having trouble with the application or this documentation? Contact the Department of Physics for assistance or bug reports.
Appendix
A. Example Queries Using Boolean Search Mode
apple banana– Finds rows containing at least one of the two words.+apple +juice– Finds rows containing both words.+apple macintosh– Requires "apple", but ranks the row higher if it also contains "macintosh".+apple -macintosh– Requires "apple" and excludes rows containing "macintosh".+apple ~macintosh– Requires "apple", but ranks the row lower if it contains "macintosh".+apple +(>turnover <strudel)– Requires "apple" and either "turnover" or "strudel", ranking "turnover" above "strudel".apple*– Matches words starting with "apple" (such as "apple", "apples", "applesauce", etc.)."some words"– Matches the exact literal phrase "some words".
